Ice Drill 6" Blade Set
K-Drill Replacment Blades IDRLBL60 fits augers with part numbers IDRL06 and IDRL60.
How to Change the Blades
- Remove the center tip blade with 3/16” Allen wrench.
- Remove the outside chipper blades with 7/16” open end wrench.
- Replace the outside chipper blades and snug the bolts into position.
- Torque an additional 1⁄4 turn and STOP! (Don’t over-tighten)
- Torque bolt of center tip to 115 in/lbs.