AvailabilityIn stock
SKU
IDRLBL60
$40.00

K-Drill Replacment Blades IDRLBL60 fits augers with part numbers IDRL06 and IDRL60.


How to Change the Blades

  • Remove the center tip blade with 3/16” Allen wrench.
  • Remove the outside chipper blades with 7/16” open end wrench.
  • Replace the outside chipper blades and snug the bolts into position.
  • Torque an additional 1⁄4 turn and STOP! (Don’t over-tighten)
  • Torque bolt of center tip to 115 in/lbs.

OUT OF STOCK - Check with your local retailer!!