Blade sharpening for the K-Drill is FREE for the life of the product. Just send them to us when they get dull. Please wrap them securely to protect the sharp edges, put a note with your name and address inside and send them to this address.
K-Drill Blade Re-Sharpening
6667 West Old Shakopee Rd. Suite 102
Bloomington, MN 55438
Remove the center tip blade with 3/16” Allen wrench. Remove the outside chipper blades with 7/16” open end wrench.
Please let us know if you would like to purchase an additional set of blades when you return your blades for re-sharpening. We will notify you at the time of re-sharpening whether your blades cannot be re-sharpened due to wear or neglect.
The blades can be re-sharpened 2-3 times under normal use, before needing replacement. After re-sharpening blades multiple times they may fall outside the specification and will no longer cut efficiently. It will then be necessary to purchase a new replacement set of blades for your K-Drill. Under normal use, blades should be sharpened every 2 to 3 years.
Blades must not have been abused drilling into rock, gravel, sand, etc, or until the blades can no longer be sharpened. Read the warranty policy at the back of the K-Drill owner’s manual.
Allow 4 weeks for processing.